HAMPTON BAY 148 402 Manual De Instrucciones página 6

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. take care not
to lose any small parts necessary for installation.
3. Thread the hex nut (#1) onto the nipple (#2) and thread the nipple (#2) into the
coupling (#11).
4. Install light bulbs in accordance with the fixture's specification (DO NOT EXCEED
THE MAXIMUN WATTAGE RATING!!)
5. Slide the tube (#3), cap (#4), iron washer (#5), plastic washer (#6), glass shade (#7),
bottom cap (#8) over the nipple (#2), insert the washer (#9), and secure with the finial
(#10).
6. Installation is complete. turn on the power at the circuit breaker or fuse box. turn the
light switch on to activate the fixture.
Page6