VOSKER V200-V Guia De Inicio Rapido página 4

CHARGING THE INTERNAL BATTERY
Charge the camera for 24-48 hours before use. While charging, make
sure the camera is turned off and the solar panel is facing down so it
does not interfere with the USB charging process.
Plug the 12V-USB cable from the 12V port at the bottom of the came-
ra and connect it to a USB port. Once plugged, the screen will turn on
and it will show the charging battery level for 10 seconds. Press the
OK button once more to see the battery level reappear.
INSERT SD CARD

We suggest formatting your SD card
if it's been in another electronic device.
4
Open the case of your camera (right hand side)
Insert an SD/SDHC memory card (up to
32 GB capacity) in the card slot with the label
side facing upward. The card is inserted correc-
tly when click is heard. Always ensure that the
camera is OFF before inserting an SD card.