VOSKER V200-V Guia De Inicio Rapido página 10

Click on Start Camera and select the desired operating mode (photo,
time lapse or video) in the Mode menu by pressing OK. If you start the
camera in Video mode, make sure that you have enabled the Photo
First setting.
When the mode is selected, the test light in front of the camera will
flash for 30 seconds to allow the user to leave the area without being
photographed or recorded.
The camera has now updated its status in the VOSKER app with its
latest information. The camera is now ready to take pictures and trans-
mit them to your VOSKER app upon the next synch. Synchs are set by
default to every 4 hours from midnight.
Note: If your camera did not send the photo and/or the
status in the 15 minutes following the completion of
the last step. Please turn OFF the camera and perform
the steps 1 to 5 again. If the problem persists, please
consult the Help section of your VOSKER APP.
INSTALLATION OF THE CAMERA
Install the camera with or without the mount
Recommended installation height:
The camera should be installed at a reasonable distance from the area
you want to secure.
Ideal installation for quality pictures & videos:
For a better field of view, keep in mind that depending on the weather
and the camera you are using, the normal range of detection is 100 feet
To get brighter pictures at night, you should have elements in the
background to reflect back the IR flash to the camera.
10
Help