Roborock S6 MaxV Manual De Usuario página 22

Installation
Using the Robot
6. Mopping the floor
Note:
To prevent excessive dirt buildup on the mop, floors should be vacuumed at least three times before
the first mopping session.
①
Remove the water tank
Press the water tank latch and slide the tank backwards.
②
Fill the water tank
Open the water tank, fill it with water, and close it tightly.
Note:
・
To prevent corrosion or damage, do not use cleaning fluid or disinfectant in the water tank.
・
Do not use hot water as this may cause the tank to deform.
③
Reinstall the water tank
Slide the water tank into the robot until you hear it lock with a click.
④
Install the mop cloth
Dampen the mop cloth and wring it until it stops dripping. Insert it into
the bottom along the slot of the water tank and stick it firmly in place.
Note:
Use virtual barriers and no-mop zones to prevent the robot mopping carpeted floors.
21