FITFIU FITNESS MC-500 Manual Usuario página 55

ASSEMBLY
STEP 1
1. Take the main frame out of the box and place it on the floor. Take the accessories out.
2. Use M8 x 65 screws and secure them into the support tube with the washers.
Screw
M8*45
Screw
M8*20
Washer
M8
STEP 2
1. Lift the console to check the signal connexion, insert two M8x20 screws with the washers and fasten them.
STEP 3
1. Use 2 ST4X15 screws to secure the plastic covers to the support end.
2. Use 4 ST4X15 screws to fit the plastic cover to the base..
Screw
ST4X15
STEP 4
1. Use 2 M8x90 screws to secure the U-support to the upright support with the washers.
2. Use 2 M8x65 screws to secure the main frame to the U-support with washers and nuts.
3. Turn the switch on, the machine is ready for use.
After the installation of this treadmill it is possible to see the two connecting lines of the two ends of the running
surface, which guarantees its stability. And it is carried out by means of a meticulous heat-sealing process during its
manufacture. It is the longest lasting way to join the tape itself and ensure the life of the product.
Screw
M8*20
Washer M8
55
MC-500
EN