ASROCK 775Twins-HDTV Manual Del Usuario página 22

D. Click the enable button or disable button accordingly for YPbPr
display output.
E. Click OK or Apply to save the changes or use hot key to do fast
switching between CRT and YPbPr. (Default hot key is Alt-F5.)
F. Your HDTV will start to display.
Step 5. Change HDTV display settings. (Please refer to Step 3 on page 20 for
details.)
2.8.2 2.8.2 TV Support Function TV Support Function
2.8.2 2.8.2 2.8.2 TV Support Function TV Support Function TV Support Function
Connecting to TV With AV Output Capability Connecting to TV With AV Output Capability
Connecting to TV With AV Output Capability Connecting to TV With AV Output Capability Connecting to TV With AV Output Capability
Step 1. Connect the AV video cable to the Typical TV Video Input connector
(yellow) and the RCA-type component video connector (blue) / AV
(composite) signal connector (PB-CON1, see page 19, No. 2) of the
VGA_HDTV panel.
Step 2. Turn on your computer and wait system to boot into OS.
Connecting to VGA Monitor and TV With AV Output Connecting to VGA Monitor and TV With AV Output
Connecting to VGA Monitor and TV With AV Output Connecting to VGA Monitor and TV With AV Output Connecting to VGA Monitor and TV With AV Output
Capability Capability Capability
Capability Capability
When you install both VGA monitor cable and AV video cable to VGA_HDTV panel
at the same time, the default enabled screen is the VGA monitor. You are able to
switch the monitor display to TV display by following the below instruction.
Step 1. Connect one end of the VGA monitor cable to your monitor, and the other
end to the VGA port (VGA1, see page 19, No. 4) of VGA_HDTV panel.
Step 2. Connect the AV video cable to the Typical TV Video Input connector
(yellow) and the RCA-type component video connector (blue) / AV
(composite) signal connector (PB-CON1, see page 19, No. 2) of the
VGA_HDTV panel.
Step 3. Turn on your computer and wait system to boot into OS.
Step 4. Switch the monitor display to TV display and select proper TV format. For
selecting proper TV format, please follow the below steps:
A. Click the Windows Start button, point at Settings, and then click
Control Panel.
B. Double-click the Display icon, click the Settings tab, and use the
Screen Area slider to select the resolution you want.
C. Click the Advanced button, then click the Displays tab.
D. Click the TV tab, and select NTSC, PAL.
E. Your TV will start to display.
2 2 2 2 2 2
2 2 2 2
ASRock 775Twins-HDTV Motherboard
Enable Button (Green) Disable Button (Red)