ASROCK 775Twins-HDTV Manual Del Usuario página 19

Tabla de contenido

Idiomas disponibles

2.8

Installing VGA_HDTV Panel to Enjoy HDTV (High-

2.8

Installing VGA_HDTV Panel to Enjoy HDTV (High-

Definition TV) / TV Support Function

Additional VGA_HDTV panel with VGA and 3 RCA-type component video output, that

allows PC to connect to all high-definition TV with component video input capability

(YPbPr) or TV with AV input capability.

ASRock VGA_HDTV Layout

Y-CON1: RCA-type component video connector (green)

PB-CON1: RCA-type component video connector (blue) /

AV (composite) signal connector

PR-CON1: RCA-type component video connector (red)

VGA1: 25pin D-Sub (blue) for VGA monitor

J2 header

J1 header

Installing VGA_HDTV Panel

Step 1. Either end of the VGA_2X8 cable can be connected to the J1 jumper of

VGA_HDTV panel or the VGA1 header of this motherboard.

Step 2. Either end of the AV/S_2X3 cable can be connected to the J2 jumper of

VGA_HDTV panel or the TV-OUT header of this motherboard.

Step 3. Connect the output connectors to all high-definition TV with component video

input capability (YPbPr) or TV with AV input capability.

Step 4. Secure the VGA_HDTV panel with the bracket to the chassis.

1. You must have a monitor attached to your computer to install the VGA

driver correctly in advance.

2. After installing the VGA driver to the computer, this motherboard supports

static "Auto Sensing" feature. That is, if you install the stand alone

HDTV, TV, or VGA monitor before your computer boots, the system can

display correctly on the output device you use. Therefore, if you only

install HDTV or TV instead of VGA monitor, it is not necessary for you to

enable the TV display setting in Windows control panel or change BIOS

setup, and you can enjoy the HDTV or TV display function directly.

ASRock 775Twins-HDTV Motherboard

1 9

Tabla de Contenido

Tabla de contenido