Memory Function; Cleaning - Predator D12 Manual De Instrucciones

Auto Shut off with Water Tank Full Indicator
The unit will enter into the standby mode when water tank is full or the water tank is not installed properly. After
emptying the tank, or install the water tank properly the unit will go on to the previous mode.
Except for the power button, all other buttons are invalid.

Memory Function:

1- When unplugged directly or power cut, then reconnect to the power supply, the dehumidifi er will run with the
mode prior to the shutdown. The timer setting will be kept.
2- Press the power button to switch off the dehumidifi er, and then press the power button to switch it back on.
The dehumidifi er will run with the mode prior to the shutdown. The timer setting will be canceled.
3- Switch off the dehumidifi er and unplug the power cord, then reconnect the power supply and switch on the
dehumidifi er. It will run as factory preset mode the fi rst time you received the dehumidifi er.
When used regularly , the fi lter may become clogged with dust and particles. Therefore the fi lter should be cleaned
at least every two weeks. Follow these steps:
29
(2S )

CLEANING

1. Switch the device off and remove the plug from the socket before cleaning.
2. Clean the housing with soft, dry cloth. If the device is extremely dirty, use a mild
cleaning agent. Wipe the dehumidifi er with a slightly damp cloth. Never spray the
device with water.
www.glaziar.com / [email protected]