Preparations Before Use; Installing The Display Box; Handling Tips; Useful Features - Tanita BF-522W Manual De Instrucciones

GB

PREPARATIONS BEFORE USE

Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the
Open as shown.
supplied AA-batteries as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are
Please note that the included batteries from factory may have decreased
energy levels over time.
Direction of the batteries.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal
vibration to ensure safe and accurate measurement.
Note: To avoid possible injury, do not step on the edge of the platform.

INSTALLING THE DISPLAY BOX

The display box should be set on a table or mounted on a wall.
1.
Take care that the display does not fall off the table.
Note: Avoid holding the display unit in your hands while measuring yourself,
To attach the display box to a wall, follow the steps below:
2.
1.Using a screwdriver, attach the bracket to a wall by inserting the two
screws into the holes in the bracket – you may need to pre-drill two holes
in the wall.
3.
2.Attach the display box to the bracket by inserting the tabs on the bracket
into the holes on the back of the display box.
3.Be sure that the display box is fixed firmly on the bracket.
Unless securely attached, the display box may fall off.
5
All manuals and user guides at all-guides.com
incorrectly positioned the fluid may leak and damage floors. If you do not intend to use this
unit for a long period of time, it is advisable to remove the batteries before storage.
since its weight (0.6 lb or 0.25 kg) will be added to your weight.

HANDLING TIPS

This monitor is a precision instrument utilizing state-of-the-art technology. To keep the unit in the best condition,
follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the platform horizontally, and place the display unit in its wall-mounted bracket, or in another area where it will
not be dropped or stepped on.
Do not wrap cord around the platform or display during storage.
Doing so may cause damage to the cord.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them
shiny; avoid soaps.
• Do not step on the platform when wet.
• Do not drop any objects onto the platform.

USEFUL FEATURES

• Tanita Body Fat Monitor/Scales allow you to measure both weight and body fat percentage simultaneously and easily,
simply by stepping on a scale.
• Your Body Fat Monitor/Scale can be set for Adult or Children (ages 7-17), Male or Female.
• In addition, the BF-522W can be set to Adult Athlete mode.
• button provides quick weight readings.
• The unit emits a helpful "beep" when activated, and also at various stages in the programming and measuring process.
Listen for these sounds which will prompt you to step on the unit, look at your readings, or confirm a setting.

AUTOMATIC SHUT-DOWN FUNCTION

The automatic shut-down function shuts off the power automatically in the following cases:
• If you interrupt the measurement process. The power will shut down automatically within 10 to 20 seconds,
depending upon the type of operation.
• If an extraordinary weight is applied to the platform.
• During programming, if you do not touch any of the keys or buttons within 60 seconds.*
• After you have completed the measuring process.
*Note: If the power shuts off automatically, repeat the steps from "HOW TO DETERMINE BODY FAT PERCENTAGE" (p.7).
GB
6