Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
6
ATTACHMENT ARIELLE
Installation
A
(A) Hold the wall bracket (04) against the wall at the desired height. The edge
with the three holes should point upwards. The bottom of the wall bracket
should be 40-50 cm above the floor. Mark the screw holes and remove the
wall bracket. Drill five holes with a depth of 60 mm and a diameter of 8 mm
and insert the dowels (2) into the holes.
(B) Return the wall bracket to its original position and tighten the expansion
screws (03).
(C) Place the shower seat bracket (1) on the wall bracket from top to bottom
until it is firmly seated on the wall bracket and completely covers it.
(D) Secure the shower seat bracket with the two 5*8 mm Allen screws (05)
by screwing the screws into the underside of the bracket using an Allen
wrench.
C
B
D
Tabla de contenido
