Features And Controls - Power Boss Briggs & Stratton Manual Del Operario

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
A
B
C
D
E
F
G H
,
A - Spray Gun — Controls the application of water
onto cleaning surface with trigger device. Includes
trigger lock.
B - Spray Tips — Detergent, 0° and 25°: for various
high pressure cleaning applications.
C - Nozzle Extension with Quick Connect — Allows
you to switch between three different spray tips.
D - Oil Fill/Dipstick — Check and add engine oil here.
E - High Pressure Outlet — Connection for high
pressure hose.
F - Water Inlet — Connection for garden hose.
G - Pump — Develops high pressure.
H - Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F
(51°-68°C). Warm water will discharge from pump
onto ground. This system prevents internal pump
damage.
J - Detergent Siphoning Tube — Use to siphon
pressure washer safe detergents into the low
pressure stream.
K - Air Filter — Protects engine by filtering dust and
debris out of intake air.
L - Recoil Starter — Used for starting the engine
manually.
M - Fuel Tank — Fill tank with regular unleaded fuel.
Always leave room for fuel expansion.
N - Warning/Operating Instructions Tag —
Identifies hazards and proper procedure to start/
stop pressure washer.
P - High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
R - Accessory Tray — Provides convenient storage
for standard and optional accessories, such as
brushes, turbo wands, etc.
Items Not Shown:
Identification Label (near rear of base plate) —
Provides model and serial number of pressure washer.
Please have these readily available if calling for
assistance.
R
P
N
M
L
K
J
9