Detailed Operating Instructions (cont.)
Use with Compat
Standard Pump Sets
If desired, Compat Standard Pump
administration sets may used to
deliver water or formula only.
1. For standard set delivery, use only
the formula side. This allows rate
and dose programming.
2. Install set according to instructions
on page 9.
3. Select rate. Press
change.
4. Check Volume Delivered and to
reset press clear.
5. Select Dose Limit. Press
to change.
6. Select Accumulated Volume and
to reset press clear.
7. Set Strength at FS.
8. Deactivate Hydration and
Programmable Flush by select-
ing Time Interval and press until
nOnE is displayed.
or
to
12
or
