Wiring Diagram; Need Help - Jensen VM8113 Instrucciones De Instalación

Wiring Diagram

IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or
have the installation handled by an experienced technician.
When wiring is complete, reconnect the battery negative terminal.
Battery
- Connect the yellow wire to the
battery or 12 volt power source that
is always live. This wire MUST be
connected for the radio to work.
Yellow
Chassis Ground
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
White/Black
Stripe
Left Speaker
(Front)

Need Help?

For technical assistance, call the
Jensen customer support line at
1-800-323-4815.
Antenna
FILTER
BOX
Black
FRONT
Gray/Black
White
Gray
Stripe
Right Speaker
(Front)
Subwoofer Out
Parking (Pink)
Camera In
Video Out
Fuse (15A)
Camera (Green/White)
Steering Wheel Control (SWC)
(Requires PAC SWI-PS Interface
Adapter, Sold Separately)
Rear Line Out
Gray
Front Line Out
Black
Auto Antenna Control
Connect to antenna control lead and
power supply of antenna amplifier.
Tape bare end of wire if not used.
Blue
Accessory/Ignition
Connect to existing radio wire
or radio fuse.
Red
REAR
Purple/Black
Green/Black Green
Stripe
Left Speaker
(Rear)
4
(Blue)
(Yellow)
(Yellow)
R (Red)
L (White)
R (Red)
L (White)
Purple
Stripe
switched side of the
parking break circuit
becomes grounded
Right Speaker
(Rear)
+
External Power Amplifier
IMPORTANT!
The pink parking
wire MUST be
connected to the
(the part that
when the brake is
applied).