Tabla de contenido
Idiomas disponibles
Idiomas disponibles
12. Remote Control Operation.
ON/OFF slider switch - turns wall control ON or OFF
HIGH button - turns fan to HIGH speed
MED button - turns fan to MEDIUM speed
LOW button - turns fan to LOW speed
OFF button - turns fan OFF
L1 button - (not applicable for this fan)
L2 button - turns light kit ON/OFF when pressed once;
dims light kit when pressed and held down
button - turns main fan ON/OFF when pressed once
(i.e., controls ROTATION of the ENTIRE fan)
13. Testing Your Fan.
It is recommended that you test fan before finalizing
installation. Restore power from circuit box and
light switch (if applicable). Test wall control
(optional installation) by locating ON/OFF slider
switch on wall control, then set to the ON position.
Test ROTATION/OFF function of main fan with
button used to control rotation of fan; test fan
speeds of smaller fans with different fan speed
buttons and OFF button. Test the light ON/OFF
function by pressing the L2 button; test the dimmer
function by pressing the L2 button and holding it
down for 1 second. Next, locate handheld remote
control. Test fan speeds (and OFF) with the different
fan speed buttons and then test rotation of fan (and
OFF) as was done with wall control. Test light with
L2 button. If the wall and/or handheld remote
control operates all of the functions of the fan/light,
battery has been installed correctly. If the wall
and/or handheld remote control do (does) not
operate all of the fan/light functions, refer to
"Troubleshooting" section to solve any issues before
contacting Customer Service.
The tilt angle of the smaller fans may be adjusted up
or down by simply moving them gently up or down.
WARNING: To avoid personal injury or damage to
the fan, both the main fan and the smaller fans
MUST BE TURNED OFF before adjusting the tilt
angle of the smaller fans up or down.
Fan must be on LOW before setting the fan to
reverse direction. Use "reverse" button
recirculate air depending on the season.
NOTE: If the wall control/handheld remote control
interferes with other appliances, turn power off first
and then go back to the instructions in Section 11
on the previous page.
(switch not functional on handheld remote)
to
smaller fan
page 10
-
1 1
-
2 2
wall control
handheld
remote control
main fan
light
-
1 1
-
2 2
smaller fan
Capítulos
Tabla de contenido
