Dvd Basic Operation; Audio Mode; Dvd Call Button; Mute - memorex MVD1311D Guia Del Usuario

When " " appears while pressing a button, this means that the corresponding
function cannot be performed either on the disc inserted, or in the selected

AUDIO MODE

You can cycle between the audio modes as follows:
1
For DVD, Press the AUDIO button repeatedly to cycle
through the audio languages available on the playing DVD.
For CD/VCD, Press the AUDIO button repeatedly to cycle
through Stereo, Mono Left, Mono Right and Mix-Mono.

MUTE

1
Press the Mute button 1 to turn off the sound; the unit's
sound will be silenced and "Mute" will appear on the
screen. The sound can be turned back on by pressing this
button again or one of the VOLUME Up 2 or Down 3
buttons.
DVD BASIC OPERATION (GENERAL)
IMPORTANT:
mode.

DVD CALL BUTTON

1
Press the DVD CALL (D. CALL) button to show the elapsed
time and remaining time of the playing disc. Each time the
DVD CALL button is pressed, the time will change on the
screen as follows:
DVD: Title Elapsed, Title Remain, Chapter Elapsed,
Chapter Remain, Display Off.
VCD: repeatedly press the button for Single Elapsed,
Single Remain, Total Elapsed, Total Remain or Display Off.
NOTE: For VCD, if the Total Elapsed and Total Remain time
is not available, press the TITLE/PBC button to turn the
PBC on or off. Then press the D.CALL button to try again.
42