Care And Cleaning - Kohler MEMOIRS K-2258 Instrucciones De Instalación

S
Set the lavatory on the pedestal so
the hanger bolts extend through the
lavatory holes.
S
Level the lavatory.
S
Install the cap nuts and washers,
and tighten until snug.
CAUTION: Risk of
damage. Do not overtighten the cap
nuts. Overtightening may cause
damage to the product.
S
Connect and tighten the trap.
Connect the hot and cold water
supplies to the faucet.
IMPORTANT CONSUMER INFORMATION

CARE AND CLEANING

To keep your lavatory looking new, make sure you rinse it out thoroughly after each use.
DO NOT USE ABRASIVES on this product, as they will scratch and ruin the surface.
Stubborn stains, paint, or tar can be removed with turpentine or paint thinner.
CALL US FOR HELP
Here's what you need to do if you require service:
First review the installation instructions to ensure correct installation. For additional
assistance in the USA, call our Customer Service Department for direct help. You
may also contact us at our web site listed below.
Call 1-800-4-KOHLER within the U.S.
Call 001-877-680-1310 within Mexico
Call 1-800-964-5590 within Canada
A
1007275-2-
Hanger
Bolts
product
Finish Wall
Pedestal
www.kohlerco.com
4
Kohler Co., Kohler, WI U.S.A.
Lavatory
Cap Nut
Washer