Product Familiarisation; Unpacking Your Tool - Silverline 675258 Manual Del Usuario

675258
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts
g) If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards
Power Tool Use & Care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired
c) Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally
d) Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users
e) Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may
affect the power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by poorly
maintained power tools
f) Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control
g) Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous
situation
Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained
In-Car Inverter 160W

Product Familiarisation

1 LED Indicator Light
2 230V Universal Mains Socket
3 USB Socket
4 Tension Switch
5 Cigarette Plug Positive Connector
6 Cigarette Plug Negative Connector

Unpacking Your Tool

Carefully unpack and inspect your tool. Fully familiarise yourself with all its
features and functions
• Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool
Placement of your inverter
• Do not use the inverter in a damp environment, or any position where the
inverter could accidentally come into contact with water
• Always position the inverter away from direct sunlight and other
heat sources. The inverter should only be used when the ambient air
temperature is between 10-30˚C
• Allow for adequate ventilation around the inverter. There should always
be at least 25mm of clear space around the inverter. Do not place
anything on top of the inverter. Ensure ventilation holes are not obscured
• Do not use the inverter in any location where flammable gases may be
present
Connecting to a car cigarette socket
• Do not attempt to connect the inverter to any form of 230V distribution
system (e.g. building or caravan wiring)
• This inverter should only be used with 12V DC negative earth electrical
systems. Use with any other type of system may be dangerous and could
cause permanent damage to electrical components
• Remove the cigarette lighter assembly or dummy plug from the vehicle's
cigarette lighter socket and insert the inverter
• If necessary use the Tension Switch (4) to expand out the Cigarette
Plug Negative Connector (6). This allows for variation in cigarette lighter
socket size and is not an on/off switch for the device
• After a few seconds the LED Indicator Light (1) will illuminate, indicating
power is supplied and it is ready to use.
• The mains socket and USB socket are powered when inserted into a live
car cigarette lighter socket. To switch off simply remove from the socket
Note: Do not attempt to connect the inverter to the 12V supply by any other
means than the supplied connector
www.silverlinetools.com
5