System Messages; Safety Precautions - Overmax AD-05 Manual De Usuario

•
If you want to reset this counter, long-press the options select
key (3) until you can see the counter shows zero.
•
Displaying last 16 tests:
Press the options select key (3) to display the history of tests
(they will be displayed on the screen, marked with „1" serial
number, and then with relevant result)
•
To leave the test memory mode, press on/off key (4) again.

3. SYSTEM MESSAGES

Message Meaning of the message
The device has detected high alcohol level (above 2,00‰ BAC /
0.200%BAC /1.00 mg/L)
Insufficient or uneven breath sample detected. Please retake the
test (see: „how to use)
The sensor of the device is not ready. This happens when high
alcohol or dirt from the last test remains on the sensor. This being
the case, switch the device off and wait for a couple of minutes
before another test.
The device was unable to finish the test. Retake the test. Other
cause is high ambient temperature. In such case please retake the
test (see: „how to use")
Low battery. Use new AAA alkaline batteries
TThe temperature of the test was too low or too high. Restore room
temperature for the device. Before another test, wait for a couple of
minutes until the device sensor reaches the room temperature.

4. SAFETY PRECAUTIONS

•
Wait for at least 15-20 minutes if you have drunk alcohol or
smoked cigarettes before you take the test. Remember to rinse
your mouth with water.
•
To obtain precise results, it is advisable to calibrate the device
every 12 months or 300 tests.
•
The devices operates at the temperature of 10 – 40°C, with optimal
precision for tests at room temperature (i.e. ca. 20 – 26°C).
EN