Wile Bio moisture Instrucciones De Operación página 16

EN
remove some material from the surface. The top layer can be drier
because of the sun or more wet because of raining.
In winter top layer of the uncovered heap of wood chips can be
deeply frozen. Never measure moisture content in frozen wood
chips. When measuring moisture content in frozen wood chips the
measurement result is incorrect. Remember that all the storage
heaps of wood chips are always melted from the inside. Take the
sample of wood chips from the inside of the storage heap and take
the measurement on it.
Push the tip of the probe into the storage heap, so that the dish of the
probe is firmly in touch with the wood chips.
Important: Keep the meter firmly pressed against the material during
the whole measurement.
Switch on the meter with a single press on the ON/OFF- button.
The number of the selected scale will appear on the display. After that
the meter proceeds to the measurement. You will see run on the
display during the measurement. The result of the measurement
(moisture content) will be displayed in weight percent. After the
measurement the meter will automatically go off and will be ready for
a new measurement.
3.4
3.4.1
The meter can calculate the average value of several measurements.
After you have made the measurement, the result can be saved for
the average calculation.
Saving the measurement result for the average calculation
Make the measurement as usual. When the result is displayed, push
shortly the MENU- button. A will appear on the display and the meter
will add the measurement result for the average calculation. The
average calculation is ready when two numbers, for example A05 and
25,6, appear alternating on the display.
In this case A05 means, that the number of measurement results
included into the average value is 5. Number 25,6 is the average
value of those 5 measurements.
16
Processing the result
Automatic average calculation