Wile Bio moisture Instrucciones De Operación página 15

the pictures in the appendix and the description in paragraph 4,
define what sort of the wood chips described is the closest one to the
material you are going to measure. Choose the measurement scale
according to the kind of wood chips.
Paragraph 3.3 Measurement step by step contains the important
notice on possible risks of measuring moisture content in frozen wood
chips.
3.2
In order to make the transportation easier the dish probe is delivered
in the carrying case disassembled. Assemble the dish probe
according to the picture (see picture 3.2 in the appendix) and fix it to
the connector on the top of the meter. Now the meter is ready for use.
Before carrying out any measurements and every time before
measuring the new/different sort of wood chips choose the
appropriate scale.
Switch on the meter with a single press on the ON/OFF- button.
The number of the used scale will appear on the meter's display.
When the number of the scale is displayed, you can change the scale
by pushing the MENU- button:
-1- scale for wood chips
-2- scale for fine logging residue chips
-3- scale for medium coarse logging residue chips
-4- scale for coarse logging residue chips
After you have chosen the correct scale, you will see run on the
display and in a moment the meter will go off. Now the meter is ready
for use.
The setting of the scale is permanent, it will stay the same until you
change it yourself.
-0- scale is used by Wile service department to calibrate the meters.
The description of the above mentioned sorts of different wood chips
is presented in paragraph 4.
3.3
If you are going to measure from a storage heap or from the load,
Preparation for the measurement
Measurement step by step
EN
15