Trouble Shooting - Kuppersbusch CM6330 Instrucciones De Instalación

Trouble shooting

This section describes some of the most fre-
quent problems that can affect your oven,
The oven stops working
 Check the power connection.
 Check the fuses and the circuit breaker of
your installation.
 Check the position of the control and
temperature dial.
The inside light does not go on
 Change the bulb.
 Check it has been properly installed as
set out in the Installation Instructions.
Nothing happens when the keys are
pressed
 Check if the Safety Block is active.
The heating pilot light does not turn on
 Select a temperature.
 Select a setting.
 It should only come on while the oven is
heating up to the selected temperature.
Oven smoking during use
 Normal during first use.
 Clean the oven regularly.
 Reduce the amount of fat or oil in the tray.
 Do not cook at temperatures higher than
those indicated in the cooking chart.
The expected cooking results are not
achieved
 Check the cooking charts for guidance on
how your oven operates.
My accessories and shelf supports are
damaged
 You must replace them and remove them
during subsequent cleaning cycles.
28
along with the most common causes and
possible solutions.
The enamel color has changed or stains
have appeared
 The chemical composition of some food-
stuffs may cause changes in the enamel.
 This is normal and does not damage the
properties of the enamel.
If the oven is operating and there are
some irregular noises
 Check if there is any electrical arcing
inside the oven caused by foreign metallic
objects (
the Cooking guide booklet).
 Check if the ovenware is touching the
oven walls.
 Check if there are any loose items of
cutlery or cooking tools inside the oven.
slowly
 Check if inadvertently metal ovenware has
been used.
 Check if the correct operating times and
power level has been selected
 Check if the food inside the oven is a
larger amount or colder than it usually is
The food is too hot, dried out or burnt
 Check if the correct operating time and
power level has been selected.
There are some noises after the cooking
process is finished
 This is not a problem. The cooling fan
keeps on working for some time. When
the temperature has dropped sufficiently,
the fan will switch itself off.