Remove The Canopy; Disassemble The Stroller Cover; Fold The Baby Stroller - Belluno baby RIMINI Manual De Instrucciones Para Armado Y Uso

11

REMOVE THE CANOPY

• Remove the two elastic grips on both sides of the canopy (Fig. 21).
• Remove from the structure of the stroller itself, the two metal structu-
res that support it.
• In this way, the canopy is correctly removed.
21
12

DISASSEMBLE THE STROLLER COVER

• First, remove both the canopy and the armrest (Fig. 22 and 23), as men-
tioned in the previous points.
• Remove the hooks and snaps on both sides of the backrest cover, which
allows it to be attached to the stroller frame. Likewise, unfasten those
that are in the lower part (Fig. 24).
• Lastly, loosen the strips located on the back of the seat base (Fig. 25).
• In this way, you will have removed the complete cover from the stroller
frame (Fig. 26).
• Reverse operation to reattach.
18
x2
22 23
25
13

FOLD THE BABY STROLLER

• Simultaneously, press the two buttons located on both sides of the
handlebar and move the canopy backward (Fig. 27). It is important to note
that the backrest should not be reclined but in a sitting position.
• Fold the armrest inward and make sure the front wheels are locked (Fig.
28).
• Take the stroller frame from both sides. Bring it slightly forward and
then quickly down (Fig. 29). This can be helped by placing the palm of your
hand under the base of the seat and pushing it up.
• Once the backrest is down, the front axle must be folded in (Fig. 30).
• Place the safety lock to keep it closed (Fig. 31).
• The stroller is correctly folded and ready to be transported (Fig. 32).
24
26
19