Replacing Components; Instructions For Use - MBM PEG7750I Manual De Uso E Instalación

Before proceeding see chap. 2
Before proceeding remove the knobs
and the panel
REPLACING THE TAP
1. Unscrew the gas inlet and outlet con-
nections
2. Unscrew the supply of the pilot burner
3. Unscrew the thermocouple
4. Reassemble the new tap
5. Retighten all the connections
Check the gas seal with the
special tools
REPLACING VALVE (INDIRECT)
1. Unscrew the gas inlet and outlet con-
nections and the electrical connections
2. Unscrew the supply of the pilot burner
3. Unscrew the thermocouple
4. Reassemble the new tap
5. Retighten all the connections
Check the gas seal with the
special tools
LOCATION OF MAIN COMPONEN-
TS - see SECT. IMAGES - REF. o)
The layout of the figures is purely indi-
cative and can undergo variations.
1. Cavity pressure safety valve.
2. Cold water tap for introducing water
in cooking compartment.
3. Hot water tap for introducing water in
cooking compartment.
4. Cavity water level control visual di-
splay
5. Gate valve for filling and controlling
water in the cavity.
6. Gate valve draining foodstuff from
cooking compartment.
7. Piezoelectric button (see Knobs,
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.

REPLACING COMPONENTS

REPLACING THERMOCOUPLE
1.Unscrew the thermocouple from the tap
2.Unscrew the thermocouple from the pilot
3.Reassemble the new thermocouple
and tighten the connections
REPLACING PLUG
1. Disconnect the high voltage cable of
the plug
2. Unscrew the nut
3. Reassemble the new plug
4. Connect the high voltage cable
REPLACING PIEZOELECTRIC
1. Remove the pot drain taps, cavity
load and cavity level
2. Remove the central panel
3. Disconnect the cable from the piezo-
electric igniter
4. Remove the igniter to be replaced
5.Reassemble the new piezo igniter
When placing the removed
parts back, do not invert their-
position
If necessary, contact the authori-
sed assistance and refer to the
Technical Manual.

INSTRUCTIONS FOR USE

keys and indicator light modes and
functions).
8. Gate valve filling water into cavity.
9. Burner adjustment knob (see Knobs,
keys and indicator light modes and fun-
ctions).
10. Pilot light control (inside appliance).
11. Cover opening/closing handle.
12. Pipe for introducing water in co-
oking compartment.
13. Cooking compartment.
14. Water cavity drainage tap (inside
the appliance).
KNOBS, KEYS AND INDICATOR
LIGHT MODES AND FUNCTIONS
see SECT. IMAGES - REF. p).
- 16 -
7.
8.