Idiomas disponibles
Idiomas disponibles
Mem
-
+
C1
C2
C3
C4
P2
P1
M1
M2
Switching the lamp on and off:
The lamp is switched on and off by pressing the
where it was switched off.
The lamp can also be switched on by pressing any colour button, memory or program.
Increasing and decreasing colour brightness:
Select the colour desired by PRESSING ONCE on the "C1", "C2", "C3" or "C4" buttons.
Press "+" to increase or "-" to decrease brightness.
Accessing the colours memorised in "C1", "C2", "C3" and "C4":
Press the button for your colour choice TWICE in quick succession.
Modifying and storing new colour in "C1", "C2", "C3" and "C4":
The "C1", "C2", "C3" and "C4" buttons have been assigned a preset base colour:
red, green, blue and white respectively. To replace these preset colours with different ones,
select a new colour combination, then press "Mem" and finally the target button:
"C1", "C2", "C3" or "C4". The new colour is now stored in the button.
Accessing colours memorised in "M1" and "M2":
Press the button for your colour choice TWICE in quick succession.
Modifying and storing new colour in "M1" and "M2":
The "M1" and "M2" buttons each store a colour combination that has been decided
by the user. To replace these preset colours with different ones, select a new colour
combination, then press "Mem" and finally the target button: "M1" or "M2". The new
colour is now stored in the button.
Accessing programs:
The lamp has two automatic, factory-stored programs:
SEQUENTIAL (P1) and RANDOM (P2). To access them, simply press the "P1" or "P2"
button ONCE.
NOTE:
In the event of a power cut, the lamp will store the program just as it was immediately
prior to this interruption for when power is restored.
Functions of the Oven-60 remote control unit
On / Off
+
Increase brightness after making
colour selection
-
Reduce brightness after making
colour selection
C1
One click to select Colour 1
Double click: switch on colour red (preset)
C2
One click to select Colour 2
Double click: switch on colour green (preset)
C3
One click to select Colour 3
Double click: switch on colour blue (preset)
One click to select Colour 4
C4
Double click: switch on colour white (preset)
P1
P2
Mem
M1
M2
" "
button. It will switch on at the point
Sequential colour program
Random colour program
Memorise colour in M1, M2,
C1, C2, C3 and C4 buttons
Colour selected by user
Colour selected by user
