Troubleshooting - GBC Shredmaster Instrucciones De Manejo

0
MAINTENANCE
For best performance it is recommended that you oil the cutting blades whenever a decrease in shred
capacity is noticed. Follow the steps below to oil your cutting blades:
1. Pour a steady stream of lubricant across scrap sheets of paper.
2. Turn the shredder on and shred the lubricated sheet.
3. When shredding is complete, reverse the shredder to help distribute the lubricant across the
cutting blades.
!
WARNING
recommends only the Shredmaster lubricant which is a non-flammable, non-aeosal, and
biodegradable formula. The use of other lubricants, aeosals,or pump sprays, may be a fire or combus-
tion hazard due to the solvent content, atomization, or the propellant.
ACCESSORIES
Shred Bags Please refer to the label on the inside of the front door of your shredder cabinet for
the part number for the proper bag for your unit.
Shredder Oil Order Part Number 1760049
To order contact your dealer or call GBC National Service at 1–800–790–7787.
TROUBLE SHOOTING
If your machine does not function please check the following:
SYMPTOM
Unit will not run
BIN FULL light " " will not turn off
OVERLOAD Light " R" will not turn off
Decrease in sheet capacity
If none of the above actions correct the problem contact your local dealer or call GBC National Service at
1-800-790-7787.
SPECIFICATIONS
Model: 3220S
Throat Width 10 1/4"
Shred Size 1/4"
Sheet Capacity 18–20
Speed 25
Duty Cycle Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Shredder Head Wt. 26.0 lbs.
Total Unit Weight 52.0 lbs.
Amperage 5.6 A
Volts/Hz 115V/60Hz 115V/60Hz 115 V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz
CORRECTIVE ACTION
Plug unit in.
Switch Unit to ON "I" position.
Close cabinet door.
Empty shred bin.
Check shredder and cabinet interface, see "Set Up".
Clear overload.
After opening the cabinet door, switch unit to the "OFF" position
and then back to the "ON" position.
Lubricate cutting blades per "Maintenance" section of this Manual.
3260X 3270M
10 1/4" 10 1/4"
3/16" x 1 1/2" 3/32" x 19/32"
12–14 8-10
25 25
27.0 lbs. 37.0 lbs.
53.0 lbs. 63.0 lbs.
5.6 A 5.6 A
4220S 4260X 5020S
12" 12"
1/4" 3/16" x 1 1/2"
20–22 14–16 12– 14
30 30
53.0 lbs. 53.0 lbs. 57.0 lbs.
89.0 lbs. 89.0 lbs. 99.5 lbs.
8.0 A 8.0 A
5220S 5260X
15" 15"
1/4" 1/4" 3/16" x 1 1/2" 3/32"x19/32"
20–22 15–17
30 40
59.5 lbs. 58.0 lbs.
99.0 lbs. 97.5 lbs.
4.6 A 8.0 A 8.0 A
4
5270M
15" 15"
10–11
35 35
58.0 lbs.
97.5 lbs.
8.0 A