Air Direction - GEA AEW14 Manual Del Propietario Y Instrucciones De Instalación

Using the Air Conditioner
ECO Mode
This mode optimizes the cooling power of your air
conditioner, thereby saving you energy. Once the set
point temperature has been reached, the fan will cycle
off to save energy. The fan will cycle back on periodically
to insure all cooling capacity in the system is used. This
mode is the default mode for the unit. Each time the
unit is powered off, it will restart in ECO mode ON. This
includes Delay timer mode. The first time the unit is
adjust the fan speed and temperature to your personal
comfort.
Fan Only Mode
to provide air circulation and filtering without cooling.
Since fan-only settings do not provide cooling, a Set
temperature cannot be entered. The room temperature
will appear in the display.
Auto Fan Speed
Set to Auto fan speed for the fan speed to automatically
set to the speed needed to provide optimum comfort
settings with the set temperature.
Control Display On and Off
To reduce brightness during sleeping hours, this air
conditioner control display has an automatic off feature
where the control display will turn off completely
after 2 minute of inactivity. To illuminate the control
interface, press any button on the control display or
remote control. The control display will illuminate all
previously illuminated LED's. The control interface will
now respond to any prescribed button press after it is
illuminated.
Power Outage Recovery Feature
In the case of a power outage or interruption, the unit will
automatically restart in the settings last used after the
power is restored. If the Delay 1–24hr feature was set, it
will resume countdown. You may need to set a new time
if desired.

Air Direction

only.
6
ECO ON—Helps minimize electricity use. It is normal
for the fan to cycle off and then back on in this mode.
the fan will cycle off, you may notice a variation in room
temperature and humidity.
ECO OFF—When this mode is not engaged, the fan will
run continuously, and in Cool mode the compressor will
cycle on and off to maintain room temperature.
NOTE: Auto Fan Speed cannot be used when in the Fan
Only Mode.
If the room needs more cooling, the fan speed will
automatically increase. If the room needs less cooling,
the fan speed will automatically decrease.
NOTE: Auto Fan Speed cannot be used when in the Fan
Only Mode.
49-5000084