MADER KWIW1802-20 Manual De Instrucciones página 33

• Do not damage the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep the cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of an electric
shock.
• When operating a power tool outdoors, use an extension cable suitable for
outdoor use. Using a cord suitable for outdoor use reduces the risk of an
electric shock.
• If operating a power tool in a damp location is unavoidable, use a power
supply protected by a residual current device (RCD). Using an RCD reduces the
risk of an electric shock.
5.3. P
ERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool when you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention when
operating a power tool may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Using safety equipment
such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection
whenever it is needed will reduce the risk of personal injury.
• Avoid accidental starts. Ensure the switch is in the off position before
inserting the plug. Carrying power tools with your finger on the switch or
plugging in power tools when the switch is in the on position makes accidents
more likely.
• ▪ Remove any adjusting keys or spanners before turning on the power tool. A
spanner or key left attached to a rotating part of the power tool may result in
personal injury.
• Do not reach out too far, always keep your feet firmly on the ground. This will
enable you retain control over the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from the power tool. Loose clothes, jewellery or
long hair can become entangled in the moving parts.
• If there are devices for connecting dust extraction and collection facilities,
please ensure that they are attached and used correctly. Using such devices
can reduce dust-related hazards.
5.4. P
OWER TOOL USE AND CARE
• Do not expect the power tool to do more than it can. Use the correct power
tool for what you want to do. A power tool will achieve better results and be
safer if used in the context for which it was designed.
• Do not use the power tool if the switch cannot turn it on and off. A power tool
with a broken switch is dangerous and must be repaired.