Removing Infant Car Seat From Stroller; Folding Stroller With Icsa Attached - Britax BOB Gear Duallie Guia Del Usuario

6� Adjust restraint belt
Pull on red ring to remove slack
from the restraint belt.
7� Raise stroller seat
Raise the stroller seat back until
it makes contact with the infant
car seat (see stroller user guide if
necessary).
Removing Infant Car
Seat from Stroller
1� Prepare stroller
Set parking brake, recline stroller
seat, rotate canopy towards
handlebar (see stroller user guide
if necessary).
2� Unfasten restraint belt
Unfasten buckle, place restraint
belt ends to sides of stroller seat�
3� Remove infant car seat
Activate release handle on infant
car seat then lift infant car seat
straight up and off stroller with
infant car seat carry handle.)
Duallie Infant Car Seat Adapter for Graco
Folding Stroller with
ICSA Attached
1� Remove infant car seat
Remove infant car seat from ICSA
(see previous section).
2� Empty stroller
Remove contents from low boy
cargo basket and pockets.
3� Unbuckle seat retention strap
Unbuckle red seat retention strap
at back of stroller.
4� Fold handlebar
Squeeze both handlebar release
levers simultaneously (see stroller
user guide if necessary).
5� Rotate handlebar forward
Slightly rotate handlebar towards
seat and hold in place during next
step.
6� Lift red frame release handle
Using a short, quick tug, lift
red frame release handle up.
Keep tires on ground as stroller
collapses toward front wheel (see
stroller user guide if necessary).
NOTE: We do not recommend
leaving the stroller folded with the
ICSA installed for long periods of
time as it may leave an imprint
in the stroller seat. For long term
folded storage, remove the ICSA.
9