Using The Appliance - Silvercrest SHN 3.7 B1 Instrucciones De Uso

To fit a pumice attachment 3/0 (see fig . 1):
1) Push the pumice attachment 3/0 with the drive shaft q into the drive shaft
socket 9 .
2) Press the other side of the pumice attachment 3/0 downwards . Ensure that
the catch 2 slides correctly into the groove and clicks into place .

Using the appliance

WARNING – RISK OF INJURY!
► Excessively long or intensive treatment can also injure deeper layers of skin .
Therefore, check the treatment progress and results regularly . Diabetics in
particular are less sensitive on their hands and feet .
NOTE
► The appliance will not be so effective on softened skin . Therefore, do not
carry out any pretreatment in a water bath before using the appliance .
► Stop treatment immediately if it becomes uncomfortable or painful .
1) Select the desired pumice attachment 3/0:
– coarse pumice attachment 3 (grey): for particularly thick calluses
– fine pumice attachment 0 (turquoise): for mild calluses and to smooth the
skin .
2) Fit the pumice attachment 3/0 as described in the section "Use" .
■ 26 │ GB │ IE
Figure 1
SHN 3.7 B1