Preparation For Operation; Cooking Recommendations - Oursson AG2603D Manual De Instrucciones

UTILIZATION
Control panel, Рiс. С-1
Temperature adjustment from 80°C up to
200°C. Holding the button will change the
temperature faster.
Start/Pause: press the button to start or pause
the cooking program.
ON/OFF button
Menu button (select cooking program)
Adjust the cooking time from 0 to 60
minutes. Holding the button will change
the cooking time faster.
heating indication
ventilation indication
cooking temperature indication
indication of cooking time in minutes
French fries program
Bacon Cooking Program
Cooking program for poultry meat (chicken
drumsticks)
Seafood cooking program
Steak cooking program
Baking program
Cooking program for vegetables and mush-
rooms
Fish cooking program

Preparation for operation

Before first use, wipe the body of the device with a soft,
dry cloth. Wash other parts
and dishwashing liquid. Thoroughly dry all parts. Before
assembling or disassembling the device, make sure
that the device is unplugged.
Turn on the empty device for 5-10 minutes, setting the
maximum temperature to 200 ° C to remove odors of the
new device. Ventilate the room. Allow the device to cool.
Order of operation, Рiс.D
1. Plug in the device.
2. Make sure that the bowl with the basket are in the
device. To install the basket into the bowl, open the
protective cover on the handle of the basket and
13
2 and 3 with warm water
press the button, Pic. D-1. Set the basket into the
bowl until it clicks and let go the button and close the
cover.
3. Press the button, to turn on the device.
4. Press the button and select the
heat the device before use. With the help of
buttons lower the time to 3-5 minutes. Press the
button to start the program. After the set time, the
program will automatically shut down.
5. Remove the working bowl with basket from the
device.
Do not use the bowl without the basket. Put the
ingredients in the basket.
6. Place the ingredients into the basket.
The ingredients must not exceed MAX mark,
Pic. D-2.
Do not pour oil or other liquids into the
working bowl.
7. Set the bowl into the device, Pic. D-3.
8. Press the button to select the cooking program.
When selecting the program, the cooking time and
temperature will be displayed. If necessary, change
the cooking time and cooking temperature with the
help of and
NOTE: During cooking, the heating indicators
ventilation indicators
9. At the end of cooking, the program will turn off
automatically and a beep will sound. To turn off the
program manually, press and hold
few seconds. Gently, holding the handle, remove the
bowl from the device and place it on a heat-resistant
surface, Pic. D-6. Use large kitchen tongs to get
large pieces of food. For convenience, you can also
remove the basket from the bowl. To do this, open
the safety cover on the handle of the basket and
press the button then remove the basket from the
bowl, Pic. D-1. Do not turn the basket over until it is
disconnected from the bowl, as the fat at the bottom
of the bowl can spill over into foods.
Do not touch the bowl during or immediately
after preparation to avoid burns. Hold the bowl
by the handle.
Beware of hot steam and air when removing the
cooking bowl from the device.
NOTES:
• Carefully handle the cooking bowl and basket;
they have a non-stick coating. Any damage may
result in malfunction.
• For an even frying, some products need to be
turned and shaken during cooking. To do this, it is
recommended to set the timer to half the cooking
time, you will hear the timer ring, shake or turn the
products over. Then set the timer for the remaining
cooking time. Or press pause during cooking to flip
the food.
• Depending on the quantity of the products, you can
increase or decrease the cooking time.

Cooking recommendations

• It is recommended to cut the same sized pieces of
program to
buttons.
light up periodically.
button for a
and