Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MOUNT THE PLATE
Mount the plate of the electricaI system
attaching it with 3 screws,
PLATE OF
ELECTF_AL
SYSTEM
WIRING
Note: This range hood must be properly
grounded.The
unit shoumd be installed by
a qualified
electrician
in accordance
with
all appHcabme national and mocalelectricam
codes.
GROUNDING
INSTRUCTIONS
This appliance
must be grounded,
In the
event of an electrical short circuit, grounding
reduces
the
risk of electric
shock
by
providing
an escape wire for the electric
current, This appliance is equipped with a
cord
having
a grounding
wire
with
a
grounding plug, The plug must be plugged
into an outlet that is properly instaIled and
grounded,
WARNING - Improper grounding can result in a risk of electric shock,
ConsuIt a qualified electrician
if the grounding
instructions
are not completely
understood,
or if doubt exists as to whether the appliance is properly grounded,
Do not use an extension cord, If the power supply cord is too short, have a qualified
eIectrician install an outlet near the appliance,
Set the electrical power supply within the space covered by the decorative flues,
Position the power socket at a maximum distance of 33-7/16" (85 cm) from where
the Iead exits from the hood (see ilIustration aiongside),
Make sure this does not
interfere with the bracket fastening area or with the decorative flue (where the flue
touches the wall),
Fit the plug into the power socket,
Tabla de contenido
