Lenco HS-100 Manual De Instrucciones página 5

Note: -Do not force the card into the slot; forcing may damage scanner and
the microSD memory card. Align microSD card position (as marked)
and try again.
- The microSD memory card must be formatted before scanning.
See the following instruction.
4.3 Formatting the microSD memory card
1. Insert a new
2. Press the format button into format mode. "F" shows on the LCD.
3. Press the Power/Scan button to start formatting the
4. SD card indicator will blink until format is complete.
4.4 Setting the resolution
Press the [DPI] button to select High/Low resolution.
High/Low resolution icon will be displayed on status LCD.
4.5 Setting the scan mode
Press the [C/BW] button to select Color/Mono mode.
Color/Mono icon will be displayed on status LCD.
4.6 How to scan
Hold the document firmly by one hand.
Place the scanner on the start-scanning position.
Hold the scanner tight and press the scan button once.
Slide the scanner slowly and keep your hand stable to get the best quality picture.
Press again to stop scanning.
Please note: * The maximal scan speed, see specifications. * When a scan is of
bad quality re-calibrate the white balance.
micro SD card into the scanner, then turn on the scanner.
OK
micro SD card.