Aquavitro Division 125 Manual De Instrucciones página 10

Assembly
Figure 2
After checking the integrity of each component, assemble the unit using the diagram. (Figure 2)
1. Start by placing the main Reaction Column (C) onto the Support Base (A).
2. Apply the Locking Ring (B) around the connection point of the Reaction Column (C) to the
Support Base (A).
3.
Press the Venturi Injector (L) into the intake of the Pump (G).
4. Insert the Pump O-ring (J) into the Reactor Column (C) in appropriate groove (note location
in Figure 2).
10