Health Zenith 7954 Manual De Instrucciones página 2

2
TUNE – HOLD
1 SECOND.
SYNC – HOLD
3 SECONDS.
RESET – HOLD
10 SECONDS.
"AA" 1.5V
"AA" 1.5V
"AA" 1.5V
Figure 4
TUNE – HOLD
1 SECOND.
SYNC – HOLD
3 SECONDS.
RESET – HOLD
10 SECONDS.
TUNE – HOLD
1 SECOND.
SYNC – HOLD
3 SECONDS.
RESET – HOLD
10 SECONDS.
30
Figure 5
Figure 6
TUNE – HOLD
1 SECOND.
SYNC – HOLD
3 SECONDS.
RESET – HOLD
10 SECONDS.
Figure 7
Helpful Videos – www.hzsupport.com
3. Sync the chime and push button.
• Press and hold the "SYNC" button on the
bottom of the chime until the chime sounds
a "Beep-Beep" (see Figure 4).
• Press the push button (not included) within
30 seconds (see Figure 4). The chime will
sound a "Beep-Beep" tone to indicate the
push button is synced.
• Press the push button to ensure operation.
4. Test range. Temporarily position chime and
push button where you want them mounted.
Press push button to verify chime and push
button work properly (see Figure 6). If the
chime does not sound, move the chime closer
to the push button and test again.
Note: Do not permanently mount the push
button (not included) until the push button and
chime are working properly.
5. Adjust volume control to desired volume
(see Figure 7).
6. Install the control cover. Twist the bottom
of the chime clockwise to install control cover
(see Figure 8).
Figure 8
Helpful Answers – 1-800-858-8501