Front Cover - Epson SR-610 Manual Del Usuario

English
Reset
Reset restarts the computer while its power is on.
CAUTION:
Do not press the reset switch unless an operating system runaway occurs.
When the system is reset, all unsaved data is lost.
Follow the steps below to reset the computer.
1. Open the switch cover.
2. Press the reset switch (shown in Illustration H) with a pointed object such as a
pen.
Controlling the Speaker Volume
You can control the speaker volume with the speaker volume control.
1. Open the switch cover.
2. Turn the volume control to the left to turn the volume down. Turn it to the
right to turn the volume up. See Illustration I.
Front Cover Lock
The front cover lock locks both the front cover and the unit cover.
Locking the front cover protects the HDD and other internal parts from theft.
Insert the key into the lock and turn it while slightly pushing it in to lock. Turning
to the right locks and turning to the left unlocks the lock. See Illustration J.
Adjusting the LCD Unit Angle
You can adjust the angle of the LCD unit as you like.
1. Adjust the angle of the LCD unit while pulling the LCD lever on the right side
of the LCD unit. See Illustration K.
2. Release the LCD lock lever to fix the angle. The LCD unit clicks when it is
locked in place.
3. Move the LCD unit slightly up and down to ensure that the LCD unit is
firmly fixed.
Adjusting the LCD Brightness
You can adjust the LCD brightness by pressing the backlight brightness buttons (see
Illustration L). Press the ▼ button to darken the backlight. Press the ▲ button to
brighten the backlight. The new setting is saved even if you power off the SR-610.
Reading Magnetic Stripe Cards
If the MSR unit is installed, you can read magnetic stripe cards.
You can read the data in a magnetic stripe card by swiping the card through the
MSR unit as shown in Illustration M. Hold the card, check the direction of the
arrow printed on the card, and swipe it through the MSR unit.
8 SR-610 User's Manual