Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DC Voltage Type Sensor:
The displayed value should be less than or equal to 1V. (The details shall be based
on the parameters furnished by the supplier.).
Frequency Type Sensor:
In a vacuum state, the displayed value should be 330±RPM 5%. (This only applies to
GM low frequency sensors.) The other low frequency sensors shall be based on the
parameters furnished by the supplier.).
WARNING
• The reading becomes the actual RPM only after it is multiplied by 10.
• Frequency = RPM/30. (This only applies to 4CYL.)
GENERAL SPECIFICATIONS
• Maximum
Voltage
Terminals and grounding: Refer to
different
range
voltage.
• Fuse Protection of mA terminal
• Fuse Protection of 10A terminal
• Measurement Speed
• Temperature
• Relative Humidity
• Altitude: Operating
• Battery Type
• Electromagnetic
Compatibility
• Battery Deficiency
• Negative reading
• Overloading
• Equipped with full icons display
• Manual ranging.
• Polarity: Automatically display.
• Dimensions (HxWxL)
• Weight:
• Safety/Compliances
• Certification
ACCURATE SPECIFICATIONS
Accuracy: ±(a% Reading + Digits).
Operating Temperature: 18 °C a 28 °C.
Relative Humidity: No more than 75% RH.
a. DC Voltage
RANGE
RESOLUTION
200 mV
0,1 mV
2 V
1 mV
20 V
10 mV
200 V
100 mV
1000 V
1 V
E N G L I S H •
between
any
input
protection
ACCURACY
± (0.5% + 5)
± (0.8% + 5)
: CE Version: 315 mA, 250 V, fast type,
ø5 x 20 mm
: CE Version: 10 A, 250 V, fast type,
ø5 x 20 mm
: Updates 2-3 times /seco.
: Operating: 0 °C~40 °C (32 °F~104 °F)
Storage: -10 °C~50 °C (14 °F~122 °F)
: 75% @ 0 °C to below 30 °C;
50% @ 30 °C to 40 °C.
: 2000 m; Storage: 10000 m.
: One piece of 9V (NEDA1604 o 6F22 o
006P).
: EIn a radio field of 1 V/m, Overall
Accuracy = Specified, Accuracy + 5% of
Range; in a radio field of more than 1
V/m, no assigned accuracy is specified
: Display:
.
: Display:
.
: Display: 1.
: 179 x 88 x 39 mm.
: 380 g. (including holster and battery)
: IEC61010: CAT. II 1000 V, CAT. III 600 V
overvoltage and double insulation
standard.
:
OVERLOAD PROTECTION
230 VAC
1000 VDC o 750 VAC continuous.
Use r's M a nual
45
Tabla de contenido
