Installation - Gewiss Chorus GW 10 752 Manual Del Usuario

Initialization with the Easy base unit
1. Power up the device through the bus.
2. Have the system acquire the device with one of the following procedures:
• Automatic acquisition (the device still has the factory settings):
- select the "Application ¡ New function" or "Application ¡ Edit function" menu in
the Easy base unit: the device will be recognized automatically.
• Manual acquisition (the factory settings have been modified):
- select the "Application ¡ Search device" menu in the Easy base unit;
- briefly press (< 2 seconds) the programming key. The programming LED will light
up during the acquisition process (figure A).
The device acquired by the Easy base unit will be listed, with the number assigned, in the
channels of the "Application ¡ New function" or "Application ¡ Edit function" menus.
Use a screwdriver to raise the removable slides on the side of the buttons (figure I) and
place the labels with the functions icons to clearly identify each button function. Replace
the slides.
Insert the device into a Chorus support, making sure the rear programming LED is at the
bottom.
Complete the installation with other Chorus devices or covers and fix it to the relative
container (flush-mounted box, wall-mounted box etc). Apply the finish plate.
INST LL TION
Completing installation
20