Tools And Materials; Before You Begin - Kohler K–2449 Manual Del Usuairo

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Tape Measure
Pencil
Safety Glasses Drill

Before You Begin

Observe all local building codes.
Prior to installation, unpack the new product and inspect it for
damage. Return the product to its protective carton until you are
ready to install it.
Make sure the finished wall is straight and plumb, and the floor
is flat and perpendicular to the finished wall.
This vanity is designed to allow most base moldings to pass
behind the vanity. Remove any moldings that may inhibit the
vanity from being flush against the finished wall.
Remove the drawer from the vanity before beginning the vanity
installation. Doing so will ease the installation process. Refer to
the section contained in this guide for proper removal.
Install the water supply and drain lines according to the
roughing-in information. The water supply nipples must extend
3" (7.6 cm) beyond the finished wall material.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
1061207-2-A
Assorted Siliconized
Screwdrivers Acrylic Caulk
Plus:
• Wood Screws
• Framing Nails
• 3/4" Plywood
Level
2 Kohler Co.