Resetting To Factory Default; Connecting Other Equipment; Connecting Headphones; Using Aux Inputs - Boston Horizon Solo XT Manual De Instrucciones

Resetting To Factory Default

Should you want to return your Solo XT to its "out of the box" confi guration, you can use the Factory Default
reset feature. This erases the DAB station list, clears the radio station presets, and returns all other menu
settings to there original state.
Warning: Do not use this feature unless you want to return the Solo XT to its original state. Before using this
feature you might want to make notes about how your radio is confi gured.
1
Turn the control to highlight "Setup Options'". Press the control.
MODE/INFO
2
Turn the control to highlight "Factory Default". (The "Factory
MODE/INFO
Default" menu selection is not on the initial "Setup Options" menu. Turn
the control until it appears. See the display illustrations on
MODE/INFO
page 6.) You'll see the display shown to the right.
3
Press the control to return your Solo XT to the factory default state.

Connecting Other Equipment

Connecting Headphones

Connect the headphone plug to the
speaker. If your headphones have the old-style large

Using Aux Inputs

Other audio equipment, such as an iPod or a portable CD player, can be connected to the Solo XT through
the rear panel Aux input. You will need a cable with a stereo mini plug on both ends. Select the Aux input
using the control as described in the "Selecting Sources or Setup Options Functions" section of
MODE/INFO
this manual.

Line Output

You can connect the Solo XT to another component using the

Security Cable Connection

There is a security cable connection point on the rear of the Solo XT, in the corner above the antenna
connector. This is the same as the connection point found on most laptop computers. Connect a computer
security cable between the Solo XT and a solid anchor point to help prevent theft of your Solo XT.

About Clock Memory

When power to the Solo XT is interrupted a special power component called a "super-cap" will keep the clock
functions active for a period of 24-48 hours. If the Solo XT is without power for a longer period of time you
may need to reset the clock when power is restored.
14
1
/ -inch jack on the front panel. This turns off the Solo XT internal
8
1
/ -inch plug you will need an adapter.
4
1
/ -inch Line Output jack.
8