Install The Microwave Oven; Complete Installation - Kenmore 204.73892610 Instrucciones De Instalación

Install the Microwave Oven

1. Remove the plugs from the four mounting holes on the top of
the microwave oven. Save the plugs in case the microwave
oven is used as a countertop unit in the future.
A
A. Plugs (4)
2 . Obtain the aid of an assistant to raise the microwave oven up to
the underside of the cabinet. Align the holes in the top of the
microwave with the holes drilled in the bottom of the cabinet.
3. From the inside of the cabinet insert a bolt through each washer
and drilled hole and into each hole in the top of the microwave.
Screw the bolts into the holes in the top of the oven. Gently and
evenly tighten each bolt until the microwave oven is secure and
level.
A
B
A. Bolts
B. Washers
4. Open and close the microwave oven door to test if it is installed
properly. Properly installed, the microwave oven door will
protrude in front of the front surface of the cabinet.

Complete Installation

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug microwave oven into grounded 3 prong outlet.
2. Check the operation of microwave oven by placing 1 cup
(250mL) of water on the turntable, and programming a cook
time of 1minute at 100% power.
3. If the microwave oven does not operate:
Check that a household fuse has not blown, or that a
circuit breaker has not tripped Replace the fuse or reset
the circuit breaker. If the problem continues, call an
electrician.
Check that the power supply cord is plugged into a
grounded 3 prong outlet.
See the microwave oven Use and Care Guide for troubleshooting
information.
Note: If the oven still does not operate, call the following Customer
Assistance number: 1-800-657-6119.
Installation is now complete.
Save Installation Instructions for future use.
EN-4
WARNING
.