Stinger NOSQUITO CT100 Manual De Instrucciones página 7

2. Attach Upright Pedestals. Insert Left Upright Pedestal
and Right Upright Pedestal onto corresponding posts
on base. Locate "U" cutouts on top to ensure
bottom end fit is correct. The "U" cutouts will
face away from the base. Push down to secure
(Figure 3). Fit will be tight, press firmly in place.
3. Attach the Vacuum Head. Align the left and
right posts of the Vacuum Head Assembly into
the Left and Right Upright Pedestals. Push down
on Vacuum Head to secure (Figure 4).
4. Attach Low Voltage Power Cord. Plug the
low voltage power connector end of the power
supply into the underside of the Vacuum Head
located behind the Right Pedestal Upright
(Figure 5).
5. Install Bug Basket. Your Bug Basket will be
shipped in a closed position. If you have trouble
inserting the Bug Basket, ensure the bottom
mesh cage is twisted shut and hinged door is
closed. Line up the arrow (s) on the basket with
the unlock symbol ( ) on the unit and drop into
the top of the Vacuum Head (Figures 6 & 7)
(Bug Basket should sit flat on top of Vacuum
Head). Turn Bug Basket handle counter-clockwise
180° until the arrow (s) aligns with the lock
symbol ( ). The Bug Basket will twist open in the
unit (not visible to you) and be ready to capture
mosquitoes as you lock it in place.
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
7