Chicco BabyCoccola Instrucciones De Uso página 9

FITTING SUCTION CUPS
1. Position BabyCoccola on a stable sur-
face with the holes of the suction cups
pointing upwards. (figure 1).
2. Firmly grip one suction cup at a time,
holding it in the palm of your hand
and ensuring that the concave part of
the cup adheres to it. (figure 2).
3. Lightly lubricate the head of the suc-
tion cup with some children's wipes,
cream or baby oil, then insert the
suction cup in the hole, always turn-
ing the suction cup IN THE SAME DI-
RECTION, as if it had to be screwed in.
(figure 3).
4. Check that the suction cups are prop-
erly fitted BEFORE EVERY USE. If the
suction cup is correctly fitted the
thinner part of the suction cup (neck)
is not visible after it has been fitted.
(figure 4).
INSTRUCTIONS
1. Position BabyCoccola in a dry wash-
basin with the two protruding parts
pointing towards the taps and the
suction cups in contact with the in-
side of the washbasin. The plughole is
located in the middle of the two suc-
tion cups, midway along an imaginary
line drawn between the two cups. The
entire area flanked by the oval edge,
which contains the wording BabyCoc-
cola, at the bottom of the product,
MUST remain completely inside the
washbasin. (figure 5)
2. Push down on the two holes of Baby-
Coccola, which correspond with the
suction cups, to ensure that they ad-
here firmly to the washbasin. Check
that BabyCoccola is firmly fixed to
the washbasin and that it cannot turn
over. (figure 6).
3. Adjust the temperature of the tap wa-
ter to around 37° C.
4. Carefully place your child on Baby-
Coccola in the supine position (on
their back with their tummy facing the
ceiling). Their bottom should stick out
slightly from the lower part of the prod-
uct, between the two protruding parts.
Parents should stand in line with Baby-
Coccola and their child, behind their
head and never at their side. (figure 7).
9