Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
4.
Start music play on your Bluetooth device.
After connected, you can control the playback, pause, next, previous function by both the
connected device or the DRP-121 radio directly.
5. Press Play/Pause button for 3 second to disconnect the pairing of Bluetooth function. The
display will show "bt" in flashing.
Tips:
The device will also be disconnected when the device is moved beyond the operational
range. If you want to reconnect the device to the unit, place it within the operational range.
Note:
The operational range between this unit and a Bluetooth device is approximately 10
meters. Before you connect a Bluetooth device to this unit, familiarize yourself with the
Bluetooth capabilities of the device. Compatibility with all Bluetooth devices is not guaranteed.
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
Keep this unit away from any other electronic device that may cause interference.
Radio
1. In power on mode, press FM button once for FM radio reception.
2. The display shows the radio station details throughout the radio mode.
3. Select your station by press the Next or Previous buttons for 3 seconds. The unit is in
Auto-scanning.
4. Adjust the sound by pressing Volume + and Volume - buttons.
Radio Presets
1. Press Play/Pause button for 3 seconds to enter Auto-preset function, the display frequency
starts to run.
2. The unit can store the frequencies of up to 50 radio stations in the memory automatically. A
stored frequency can be erased from the memory by storing another frequency in its place.
3 To listen to a preset station, press the Next or Previous buttons for selecting your desired
station.
To improve reception:
Pull out the telescopic aerial. To improve FM Reception incline and turn the aerial, reduce its
length if the FM-signal is too strong (very close to a transmitter).
Volume
Adjust the sound with the controls Volume + or Volume -
You may connect headphones with 3.5mm plug to socket PHONE. The loud-speaker is then
muted.
USB or SD/MMC CARD PLAYBACK
Able to decode and playback all MP3 files which stored in the memory media with USB
connector and SD/MMC Card Slot.
1. In power on mode, Press the USB/SD/BT button to select the USB or SD playback.
2. Before connecting the USB media to the unit, make sure the port is in correct direction and
will connect. Or insert SD/MMC Card straightly without bending.
3. The system will automatically start reading the MP3 files in the USB Storage Media and
SD/MMC Card.
EN-3
Tabla de contenido
