General Information; Terms And Conditions Of Warranty; Protective Clothing; Manufacturer - Master 2015.2 Manual De Instalación Y Usuario

1 GENERAL INFORMATION

1.1 TERMS AND CONDITIONS OF WARRANTY

The general warranty is not granted in the case of:
Improper storage of the machine
·
Inconvenience due to incorrect installation
·
Use by unskilled people
·
Failure to observe the performance limits
·
Excessive mechanical stress
·
Use not conform to the intended use
·
The user shall be instructed to ensure that:
All transport, connection, use, maintenance and repair operations are carried out by qualified personnel.
·
Qualified personnel means (as per IEC 364) the personnel who has training, education, experience, and knows
·
the standards, regulations, safety measures and conditions of use and service, and thus is able to carry out any
necessary intervention avoiding possible dangers and/or damages.
The staff shall have all appropriate instructions and information available, including any local requirements, and
·
shall comply with them for carrying out any operation.
Any operation, even indirect, on machines and devices, is denied to unqualified personnel
·
Any local or particular requirements and/or, in any case, any unfulfilled preventive conditions are met during
·
installation, by means of additional protection measures.
It is absolutely necessary to know the meaning of hazard signs and to ensure that messages are readable; in
·
case of deterioration, these signs must be replaced immediately, restricting the use of the machine as long
as it is not equipped with; it is recommended to follow the warnings written on the signs.

1.2 PROTECTIVE CLOTHING

When using the machine, it is mandatory to wear:
SAFETY GLOVES
SAFETY SHOES
1.5 INFORMATION ON SUPPORT SERVICE
The company MASTER ITALY s.r.l. is available for providing clarification on any technical and functional feature of the
machine.
Should you encounter any problems that are not specified in the sections below, please contact the Technical Support of
the Manufacturer:
Ph.: +39 080 4959823 , Whatsapp: +39 366 2488323 , Email: [email protected].

1.6 MACHINE DESCRIPTION

The machine has been designed and built for processing motion transmission rods for Eurogroove (CE) in Polyamide
(article Master code 2010.2) and groove R (R40) in Polyamide (article Master code 2010.1).
Mechanical rod feeding and shearing movements are manual.
The basic functions of the machine are 3:
4. Single hole
5. Single Cut and Hole
6. Double hole for burglar protection
Power is exclusively pneumatic.
Pagina 15