Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GENERAL WARNINGS
To ensure the safe assembly and operation of the commode, these instructions must
be followed. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS
INJURY TO THE USER OR DAMAGE TO THE PRODUCT. If you are unable to
understand these warnings, cautions and/or instructions, contact a healthcare
professional, dealer or Medline before attempting to use this product.
• DO NOT assemble and use this product without first reading and understanding
this user guide, otherwise injury or damage may occur.
• DO NOT use if components are missing or are damaged, contact Medline at
1-800-MEDLINE.
• DO NOT exceed weight capacity of 650lbs (294 kg).
• DO NOT make any adjustments while using the product.
• DO NOT attempt to use the arms to support full body weight.
• DO NOT stand on the commode.
ASSEMBLY:
1. Before assembling seat and lid, allow toilet seat and lid to reach room
temperature if exposed to cold. This will help prevent the seat and lid clamps
from cracking while being assembled.
2. Align the toilet seat clamps onto the back frame rail. (Both clamps should sit
outside the pail brackets). Push down on seat until clamps snap firmly into place
over frame rail.
3. Repeat the same process for the lid.
4. When removing the seat or lid, always remove lid first and then the seat. To
remove, grasp the back of the lid and/or seat and lift.
5. Install commode bucket by dropping into bucket frame. Lift bucket from frame to
remove for emptying and cleaning.
BACK FRAME
RAIL
Figure 1
BACK SUPPORT
REMOVABLE BUCKET
SEAT CLAMPS
G1-201LBX1 (PIC-00244)
REVISED: 05/20/21
Tabla de contenido
