Maintenance Chart - Scag Power Equipment SZC Serie Manual Del Operador

Section 7
7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
HOURS
Break-In 8 20 40 100 200 500
(First 10)
X
X
X
X
X
X
X
X
X
X
X
X
X
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.
MAINTENANCE
Procedure
Check all hardware for tightness
Check hydraulic oil level
Check all belts for proper alignment
Check hydraulic hoses for leaks
Check seat belts for damage
Check engine oil level
*Clean mower
Check condition of blades
Apply grease to fittings
Check tire pressure
Change engine oil and filter
Check battery electrolyte level,
clean battery posts and cables
Check belts for proper alignment
X Apply grease to fittings
X Change engine oil
X *Clean air cleaner element
29
Comments
See paragraph 7.3
See paragraph 7.8
Use extreme caution when
checking the hydraulic hoses
See paragraph 2.6
See paragraph 2.5
See paragraph 7.4
See paragraph 7.11
See paragraph 7.9
See paragraph 7.2
See paragraph 7.10
See paragraph 7.4
See paragraph 7.7
See paragraph 7.8
See paragraph 7.2
See paragraph 7.4
See paragraph 7.6