Ce Declaration Of Conformity - Genius INTERMODO2 868 Guia De Inicio Rapido

Ocultar thumbs

Contenido

página de 15

/ 15
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

. MEMORY STORAGE OF RADIO CONTROLS

A maximum of 250 codes, divided between chan-

nels 1 and 2 can be stored in the memory

On the SLH master radio control, simultaneously press

and hold down push-buttons P1 and P2.

The radio control LED begins to flash (for about 10

secs.).

Release both push-buttons.

Press, for 1 second, the push-button on the receiver

(Fig.1 ref.h) relating to the channel you wish to

associate with the radio control.

The relevant LED on the receiver (Fig. 1 ref. g) begins

to flash slowly for 5 secs.

Within these 5 secs., while the radio control LED is still

flashing, press and hold down the required push-but-

ton on the radio control (the radio control LED lights

up on steady beam).

The LED on the board (Fig.1 ref.g) lights up on steady

beam for 1 second and then goes OFF, indicating that

storage was executed.

RRelease the radio control push-button.

Quickly press twice in succession the memory stored

radio control push-button.

The board will send a command to the output

associated with the channel.

10.

To add other radio controls, transfer the code of the

memory-stored push-button of the radio control to

the relevant push-button of the radio controls to be

added, observing the following procedure:

a–

On the memory stored radio control, simultaneously

press and hold down push-buttons P1 and P2.

b–

The radio control LED begins to flash.

c–

Release both push-buttons.

d–

Press the memory stored push-button and hold it

down (the radio control LED lights up on steady

beam).

e–

Bring the radio controls near, press and hold down

the push-button of the radio control to be ad-

ded, releasing it only after the double flash of

the radio control LED, which indicates learning

was executed.

f–

Quickly press twice the push-button of the new

memory stored radio control.

The board will send a command to the output

associated with the channel.

4. DELETION OF ALL RADIO CONTROLS

To delete ALL the radio control codes associated with

channels 1 and 2, hold down push-button SW1 or SW2

(Fig.1 ref. h) for 10 seconds.

The LED (Fig.1 ref. g) relating to the pressed push-

button flashes for the first 5 secs., and then flashes

more quickly for the next 5 secs.

The LED lights up on steady beam for 2 secs and

then goes OFF.

Release the pressed push-button when both the

relevant LED lights up on a steady beam.

This operation is NOT reversible.

5. FUNCTION LOGIC

You can command the receiver channels from

different radio controls. (E.g.: radio control 1

commands channel 1, radio control 2 comman-

ds channel 2)

PULSE FROM RADIO CONTROL

CHANNEL 1

OU-

PULSE

TPUT 1

OU-

TPUT 2

6. DESCRIPTION OF THE LABEL

a Name of producer

b Model identification code

c Identification number of the production batch

d Read the instructions

Observe the current regulations for a correct di-

sposal

f Notified body reference