Disc Repair Procedure - Aleratec DVD/CD Disc Repair Plus Guía De Uso

Disc Repair Procedure

The Disc Repair procedure is used to polish scratches, scrapes, and other
abrasions. It also adds a protective layer to the disc.
6
1. Open the top cover by pressing the OPEN button.
2. Remove both of the circular repair heads from the repair
protective kit.
3. Rotate the repair units in a counterclockwise motion until
secure.
4. Place 3 drops of the repair protective solution on the side of
the repair head marked "WET".
5. Insert the disc (data-side facing downward) and then close
the top cover.
6. Press the REPAIR button to begin the repairing process,
which lasts approximately two minutes. The machine will
automatically stop when the process is complete.
7. Press OPEN to remove the disc.
8. Gently wipe the disc with the included microfiber cloth to
remove any residue remaining from the repair process.
9. Check for improvements in the ability to play/read the disc.
If the disc has not been sufficiently recovered, repeat the
Disc Repair procedure.
www.aleratec.com