Default Settings; Tcp/Ip; Windows 95/98/Me; Windows Nt4.0 - Atlantis Land A02-IPCAM3 Guia De Inicio Rapido

DC-IN

1.7 Default Settings

Before you configure thisNetCamera NV, you need to know the following default
settings:
•
Password: admin
•
Username: atlantis
•
Indirizzo IP: 192.168.1.1

1.8 TCP/IP

Windows 95/98/ME

•
Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and choose the Configuration tab.
•
Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface
Card (NIC) in your PC.
•
Click Properties.
•
Select the IP Address tab. In this page, click the Specify an IP address radio
button (EG IP=192.168.1.2 and subnet Mask=255.255.255.0).

Windows NT4.0

•
Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and choose the Protocols tab.
•
Select TCP/IP Protocol and click Properties.
•
Select the IP Address tab. In this page, click the Specify an IP address radio
button (EG IP=192.168.1.2 and subnet Mask=255.255.255.0).
receive digital signals toa variety of external alarm
devices (PIR)
Attach the external power supply to the DCpower input
connector located on the nternet Camera's back panel
(labeled DC 5V) then connect it to your wall outlet
A02-IPCAM3 / A02-IPCAM4-W54
ENGLISH
29