Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connect the power adapter to the DC-IN socket on the camera as shown then check
Power Led.
The IP camera can be connected to an Ethernet network using the RJ-45 port as
shown. Connect the camera to an Ethernet hub or switch using a standard cable. You
can also connect the camera directly to a computer using the supplied cable.
Ensure the camera is fixed securely otherwise it may fall and
cause injury.
The camera is not waterproof and should not be mounted
outside or in a position where it could become wet.
Use only the power adapter with the camera. Using another
adapter, not recommended by the manufacturer, may damage
the camera and invalidate the warranty.
A02-IPCAM3 / A02-IPCAM4-W54
ENGLISH
25
Tabla de contenido
